Comments for Duncan Mac-Vicar P. http://duncan.mac-vicar.com/blog homepage Thu, 28 Aug 2008 00:56:14 +0000 http://wordpress.org/?v=2.6 Comment on openSUSE Build service : layering, linking, patching and aggregating by Marek Stopka http://duncan.mac-vicar.com/blog/archives/334#comment-96704 Marek Stopka Thu, 21 Aug 2008 12:16:56 +0000 http://duncan.mac-vicar.com/blog/archives/334#comment-96704 <p>Yeah, I love linkpac too. Buildservice is really good piece of software.</p> Yeah, I love linkpac too. Buildservice is really good piece of software.

]]> Comment on Genius tablet under Linux by Aaron http://duncan.mac-vicar.com/blog/archives/173#comment-96702 Aaron Sat, 09 Aug 2008 20:14:57 +0000 http://duncan.mac-vicar.com/blog/archives/173#comment-96702 <p>It looks like that the double line has nothing to do with loading the driver becouse in the Xorg.x.log shows other drivers being loaded just fine even with the //. That is probably just a but and not the actual loading. But the problem is when resolving a name for instance __stack<em>chk</em>fail<em>local is not resolving in the driver. What is this __stack</em>chk<em>fail</em>local? Is there something I need to install? Or does something have to be referenced?</p> <p>Thanks, </p> <p>Aaron</p> It looks like that the double line has nothing to do with loading the driver becouse in the Xorg.x.log shows other drivers being loaded just fine even with the //. That is probably just a but and not the actual loading. But the problem is when resolving a name for instance __stackchkfaillocal is not resolving in the driver. What is this __stackchkfaillocal? Is there something I need to install? Or does something have to be referenced?

Thanks,

Aaron

]]> Comment on Solving the famous “smart” case 2 by k:blog » openSUSE 11.0 http://duncan.mac-vicar.com/blog/archives/310#comment-96684 k:blog » openSUSE 11.0 Fri, 20 Jun 2008 14:39:14 +0000 http://duncan.mac-vicar.com/blog/?p=310#comment-96684 <p>[...] is került. Ezt figyelembe véve a Zypper ezen tesztesetek mindegyikét remekül megoldja (1, [...]</p> [...] is került. Ezt figyelembe véve a Zypper ezen tesztesetek mindegyikét remekül megoldja (1, [...]

]]> Comment on yum and ZYpp speed / memory usage by k:blog » openSUSE 11.0 http://duncan.mac-vicar.com/blog/archives/309#comment-96683 k:blog » openSUSE 11.0 Fri, 20 Jun 2008 14:38:09 +0000 http://duncan.mac-vicar.com/blog/archives/309#comment-96683 <p>[...] után a SOLV fájlokban történt változások, valamint az új solver szignifikáns teljesítménynövekedést eredményezettés kevesebb memóriát igényel összehasonlítva a Smarttal és a [...]</p> [...] után a SOLV fájlokban történt változások, valamint az új solver szignifikáns teljesítménynövekedést eredményezettés kevesebb memóriát igényel összehasonlítva a Smarttal és a [...]

]]> Comment on The greatest unknown openSUSE 11.0 package management feature by k:blog » openSUSE 11.0 http://duncan.mac-vicar.com/blog/archives/314#comment-96682 k:blog » openSUSE 11.0 Fri, 20 Jun 2008 14:31:01 +0000 http://duncan.mac-vicar.com/blog/?p=314#comment-96682 <p>[...] A telepítés felgyorsítása érdekében a telepítő a kiválasztott minták alapján lemezképeket használ. Ezzel párhuzamosan a csomagtelepítés is drasztikusan felgyorsult. [...]</p> [...] A telepítés felgyorsítása érdekében a telepítő a kiválasztott minták alapján lemezképeket használ. Ezzel párhuzamosan a csomagtelepítés is drasztikusan felgyorsult. [...]

]]> Comment on Genius tablet under Linux by Buying OpenSUSE? - Page 2 - openSUSE Forums http://duncan.mac-vicar.com/blog/archives/173#comment-96681 Buying OpenSUSE? - Page 2 - openSUSE Forums Fri, 20 Jun 2008 13:57:40 +0000 http://duncan.mac-vicar.com/blog/archives/173#comment-96681 <p><p>[...] 10.2 at one point following mainly these links Genius Tablet In Opensuse 10.2 - openSUSE Forums Duncan Mac-Vicar P. </p>

[...] 10.2 at one point following mainly these links Genius Tablet In Opensuse 10.2 - openSUSE Forums Duncan Mac-Vicar P.

]]> Comment on Genius tablet under Linux by Allen http://duncan.mac-vicar.com/blog/archives/173#comment-96679 Allen Thu, 19 Jun 2008 04:25:11 +0000 http://duncan.mac-vicar.com/blog/archives/173#comment-96679 <p>Duncan, </p> <p>Thank you for packaging the wizard pen drivers. I have installed the wizardpen packages from your build, but have some problems. </p> <p>Firstly, I get the following error in /var/log/Xorg.0.log</p> <p><code> (II) LoadModule: "wizardpen" (II) Loading /usr/lib/xorg/modules//input/wizardpen<em>drv.so dlopen: /usr/lib/xorg/modules//input/wizardpen</em>drv.so: undefined symbol: __stack<em>chk</em>fail<em>local (EE) Failed to load /usr/lib/xorg/modules//input/wizardpen</em>drv.so (II) UnloadModule: "wizardpen" (EE) Failed to load module "wizardpen" (loader failed, 7) (EE) No Input driver matching `wizardpen' allen@asus:/var/log> ls /usr/lib/xorg/modules/input/wizardpen<em>drv.so /usr/lib/xorg/modules/input/wizardpen</em>drv.so </code></p> <p>See the double // in the Failed to Load line.</p> <p>Also, I cannot get udev to give the device a unique name. It keeps defaulting back to mouse1. The entry under /proc/bus/input/devices is the same as yours except the product on mine is 0005 (not 0003). </p> <p>The tablet is found, and I can run the calibration, but ofcourse, without the driver, I can't use it.</p> <p>Any help would be appreciated.</p> <p>Thanks,</p> <p>Allen</p> Duncan,

Thank you for packaging the wizard pen drivers. I have installed the wizardpen packages from your build, but have some problems.

Firstly, I get the following error in /var/log/Xorg.0.log

(II) LoadModule: "wizardpen" (II) Loading /usr/lib/xorg/modules//input/wizardpendrv.so dlopen: /usr/lib/xorg/modules//input/wizardpendrv.so: undefined symbol: __stackchkfaillocal (EE) Failed to load /usr/lib/xorg/modules//input/wizardpendrv.so (II) UnloadModule: “wizardpen” (EE) Failed to load module “wizardpen” (loader failed, 7) (EE) No Input driver matching `wizardpen’ allen@asus:/var/log> ls /usr/lib/xorg/modules/input/wizardpendrv.so /usr/lib/xorg/modules/input/wizardpendrv.so

See the double // in the Failed to Load line.

Also, I cannot get udev to give the device a unique name. It keeps defaulting back to mouse1. The entry under /proc/bus/input/devices is the same as yours except the product on mine is 0005 (not 0003).

The tablet is found, and I can run the calibration, but ofcourse, without the driver, I can’t use it.

Any help would be appreciated.

Thanks,

Allen

]]> Comment on openSUSE 11 RC1, Mercedes Benz and Volkswagen. by IAnjo http://duncan.mac-vicar.com/blog/archives/317#comment-96672 IAnjo Tue, 10 Jun 2008 21:52:18 +0000 http://duncan.mac-vicar.com/blog/?p=317#comment-96672 <p>Just had a case that had to be solved "by hand" on synaptic, and I followed your examples and did a test case for zypper, and it solved it correctly, just like I had to do on kubuntu.</p> <p>Kudos for yours and the zypp team work!</p> Just had a case that had to be solved “by hand” on synaptic, and I followed your examples and did a test case for zypper, and it solved it correctly, just like I had to do on kubuntu.

Kudos for yours and the zypp team work!

]]> Comment on The greatest unknown openSUSE 11.0 package management feature by jano http://duncan.mac-vicar.com/blog/archives/314#comment-96654 jano Fri, 30 May 2008 20:44:25 +0000 http://duncan.mac-vicar.com/blog/?p=314#comment-96654 <p>Lence: http://en.opensuse.org/YaST and yast-devel@opensuse.org mailing list</p> Lence: http://en.opensuse.org/YaST and yast-devel@opensuse.org mailing list

]]> Comment on User’s feedback by John http://duncan.mac-vicar.com/blog/archives/315#comment-96653 John Fri, 30 May 2008 17:09:46 +0000 http://duncan.mac-vicar.com/blog/?p=315#comment-96653 <p>didn't know about the codecs!!! That's Great!!!!</p> <p>As to the forums... i think you made the right decision... (even if i'm very impatient to see the new forums...) I too think newbies might be forgotten on the new forums...</p> <p>but we'll see about that... anyway... it's good to have from where to choose!</p> <p>RC1 looks cool... lets see how the final version behaves ;)</p> didn’t know about the codecs!!! That’s Great!!!!

As to the forums… i think you made the right decision… (even if i’m very impatient to see the new forums…) I too think newbies might be forgotten on the new forums…

but we’ll see about that… anyway… it’s good to have from where to choose!

RC1 looks cool… lets see how the final version behaves ;)

]]>